The section contains the specific Signal Asset features to be collected and associated feature codes, GPS location requirements, and an electronic spreadsheet that includes field names, metadata and example collection data.
The SIGNAL asset class includes the following Features, Feature Codes, and GPS Location Requirements:
|Feature||Feature Code||Collect Location|
|Signal Electrical Service Cabinet||EPED||Structure Cable Entry Point|
|Signal Cabinet||SGLCAB||Structure Cable Entry Point|
|Traffic Signal Pole||SGL||Pole Roadway Side|
|Fiber Optic Pigtail - Direct Buried||FO||Every 50' and change in direction|
|Fiber Optic Pigtail- In Conduit||FOCD||Every change in direction|
|Handhole||EHH||Structure Top Center|
|Loop Detector||LOOP||In Road Loop Detector|
|Signal Ped Pole||SGLPED||Pole Roadway Side|
|Transformer||TRANS||Structure Cable Entry Point|
|Power Pole||EP||Pole Roadway Side|
|Signal Power Cable in Conduit||ECIC||Every change in direction|
|Advanced Warning Flasher||AWFPED||Pole Roadway Side|
|Arterial Fiber Optic- Direct Buried||FO||Every 50' and change in direction|
|Arterial Fiber Optic- In Conduit||FOCD||Every change in direction|
|Underground Signal Interconnect - Copper||USI||Every change in direction|
|Push Button Walk||PWB||Pole Roadway Side|
Format of Data Collection
The data shall be formatted per TABLE Z (requires Internet Explorer), which is an electronic spreadsheet that includes field names, metadata and example collection data.
Populate an "id" for structures or devices, if known, and cables collected as points should have a unique "id" per run.
Please email questions and make data requests for SIGNALS to
email@example.com at 651-234-7807.