Approved/Qualified Products

Concrete anchorages - reinforcing bar applications

Products listed in the following table are approved for use on MnDOT projects unless otherwise indicated.  Products prohibited from use in sustained tension applications may be used for applications which are not considered to carry sustained tension loads. Adhesives permitted for use with sustained tension applications may be used for all applications (sustained or non-sustained tension). All bar types and hole types marked with "approved" below are approved for use under the conditions stated in the table. Products produced by a manufacturer of a current approved product which are the same formulation, may be used on MnDOT project with certification from the manufacturer that the product has the same formulation and performance as the approved product. All anchorages must be field tested as required by the contract regardless of nominal pullout requirements. Refer to project specifications and plans to determine if the anchors are in sustained tension.

Permitted sustained tension applications are specified in MnDOT Technical Memorandum 18-11-B-01 (PDF).

Those who use any of these products are responsible to handle, store, use, and dispose of excess material in accordance with all manufacturer’s and Safety Data Sheet (SDS) recommendations.

For use in sustained tension applications

Prohibited from use in sustained tension applications