Minnesota Department of Transportation

511 Travel Info

Hwy 10—Randall

Morrison County

Current impacts

Install J-turn accesses in Randall until late October. Information subject to change.

Current work zone in Randall. Expect lane closures and changes to access, follow signs.

Sept. 10–27

Hwy 10 at Hwy 115

Close Hwy 10 access to/from Hwy 115 and 80th Ave. to reconstruct the future J-turn access:

  • Hwy 10 single lane closures on both directions, 24/7, with reduced speeds
  • Hwy 115 closed between Hwy 10 and Superior Ave.
  • 80th Ave. closed to/from Hwy 10
  • Co. Rd. 14/1 (1st St.) open, includes median crossover
  • Co. Rd. 104 (6th St.) open, includes median crossover

Randall is open

Randall is open; however, expect changes to access as crews work at each intersection. Watch and follow road signs.

MnDOT will provide changes to access as they occur on this webpage.

About this 2024 project

MnDOT will improve access and safety along both directions of Hwy 10 through Randall, which includes two J-turn intersections at Morrison Co. Rd. 14 and Hwy 115.

Hwy 115/80th Ave and Hwy 10 access Co Rd 104 at Hwy 10 Co Rd 14 and Hwy 10 access
Improve access in Randall. Select map to enlarge
  • Reconstruct the Hwy 10 access at Morrison Co. Rd. 14 with a J-turn design
  • Close and remove the Hwy 10 median crossover at Co. Rd. 104 and Willow Ln.
    • Note: Motorists will turn right and make a U-turn at the next median access
  • Reconstruct the Hwy 10 access at Hwy 115/80th Ave. with a J-turn design
  • Make other updates, as warranted

About J-turns

J-turns, also known as reduced conflict intersections, are a driving movement proven to reduce serious and fatal crashes caused by “T-bone” crashes at intersections. When using J-turns, drivers focus on one direction of traffic at a time. Learn more about J-turns in Minnesota

Illustration shows how the motorist would safely navigate and access both directions of Hwy 10 or continue across on local roads
1 Stop and yield to vehicles in both lanes to your left 2 Crossover into the lane in the median 3 Yield to vehicles in both lanes to your right 4 Make a U-turn and head towards your destination 5 Either continue through the intersection or turn right

How to use J-turns

  1. Stop and yield to vehicles in both lanes to your left
  2. Crossover into the lane in the median
  3. Yield to vehicles in both lanes to your right
  4. Make a U-turn and head towards your destination
  5. Either continue through the intersection or turn right