Concrete Anchorages6/15/2012 Not Approved for Sustained Tensile-Load (hanging from a ceiling) Overhead Applications |
|||
|---|---|---|---|
| For miscellaneous anchorage requiring an ultimate pullout strength up to 5000 pounds. Field pullout tests will be required for loads greater than 5000 pounds. Larger diameter anchor rods or more embedment may be required. Chemical anchorage will be required on all horizontal applications. | |||
| Product | Manufacturer | Type | Minimum Diameter and Minimum Embedment Depth for up to 5000 pounds |
| Spec-Bond 201 | Conspec | Adhesive/Epoxy | 7/8" diameter, 3-1/2" length |
| Sure-Grip | Dayton Superior | Adhesive/Epoxy | |
| Sure Anchor J-51 | Dayton Superior | Adhesive/Epoxy | 1/2" diameter, 4.5" embedment |
| Wedge Anchor | DFS Inc. | Mechanical Anchor | 7/8" diameter, 3-1/2" length |
| Dyna Grout | Dyna Grout | Grout | |
| HY-150 | Hilti Fastening | Adhesive/Acrylic | 1/2" diameter, 4.25" embedment |
| HVA Adhesive System | Hilti Fastening | Vinyl Urethane-Adhesive System | 5/8" diameter, 5" embedment |
| Kwik Bolt | Hilti Fastening | Mechanical Anchor | 1/2" diameter, 4" embedment |
| HIT RE500 | Hilti Fastening | Adhesive/Epoxy | 3/8" diameter, 3-3/8" embedment |
| HIT-ICE | Hilti Fastening | Adhesive System | 3/8" diameter, 2" embedment/low temp |
| HIT HY 150 MAX | Hilti Fastening | Adhesive System | 3/8" diameter, 2-1/4" embedment |
| RSE DOT | Hilti Fastening | Adhesive System | 3/8" diameter, 3-3/8" embedment |
| HTE 50 | Hilti Fastening | Adhesive/Epoxy | 3/8" diameter, 3-1/2" embedment. Use when temperature is below 60 F and allow 48 hours before loads. |
| Epcon Granite 5 (G5) | ITW Ramset/Redhead | Adhesive/Epoxy | 3/8" diameter, 3-3/8" embedment |
| Epcon System Acrylic 7 (A7) | ITW Ramset/Redhead | Adhesive/Acrylic | 1/2" diameter, 4.5" embedment |
| Redhead Anchors | ITW Ramset/Redhead | Mechanical Anchor | 1/2" diameter, 4" embedment |
| Keligrout | Kelken Construction Systems, Inc. | Adhesive/Resin | 1/2" diameter, 5" embedment/low temp |
| Keligrout 101-P | Kelken Construction Systems, Inc. | Adhesive/Resin | 1/2" diameter, 5" embedment/low temp |
| Liebig Safety Bolts | Liebig International | Mechanical Anchor | 1/2" diameter, 4" embedment |
| Liquid Roc 300 Capsules | MKT Fastening | Polyester Capsule | 3/8" diameter, 3-3/8" embedment |
| Liquid Roc 500 Low Odor | MKT Fastening | Adhesive/Epoxy | 3/8" diameter, 3-3/8" embedment |
| Polybac 1257 | Polygem | Adhesive Epoxy | 1/2" diameter, 4.5" embedment |
| Power-Fast Standard Set | Powers Fasteners, Inc. | Adhesive/Epoxy | 1/2" diameter, 4.5" embedment |
| AC 100 + Gold | Powers Fasteners, Inc. | Adhesive System | 3/8" diameter, 3-5/8" embedment |
| AC 308 + | Powers Fasteners, Inc. | Adhesive/Epoxy | 1/2" diameter, 4.5" embedment |
| Power-Stud | Powers Fasteners, Inc. | Mechanical Anchor | 1/2" diameter, 4" embedment | Pure 50+ | Powers Fasteners, Inc. | Adhesive/Epoxy | 1/2" diameter, 4-1/2" embedment |
| Speed Bond #1 | Prime Resins | Adhesive/Epoxy | 5/8" diameter, 6-1/4" embedment |
| Fastlane | Prime Resins | Adhesive/Epoxy | 5/8" diameter, 6-1/4" embedment |
| Sikadur DOT-SP13 | Sika Corporation | Adhesive/Epoxy | 1/2" diameter, 5" embedment |
| Sikadur Fast Injection Gel | Sika Corporation | Adhesive/Epoxy | 1/2" diameter, 5" embedment |
| Epoxy Tie (ET) | Simpson Strong-Tie | Adhesive/Epoxy | 5/8" diameter, 5" embedment |
| Epoxy Tie Fast Cure (ETF) | Simpson Strong-Tie | Adhesive/Epoxy | 5/8" diameter, 5" embedment |
| Set Adhesive (SET) | Simpson Strong-Tie | Adhesive/Epoxy | 5/8" diameter, 5" embedment |
| Acrylic Tie (AT) | Simpson Strong-Tie | Adhesive/Acrylic | 3/8" diameter, 3.5" embedment |
| Wedge-All Expansion Anchor | Simpson Strong-Tie | Mechanical Anchor | 3/4" diameter, 3-3/8" embedment |
| EDOT | Simpson Strong-Tie | Adhesive/Epoxy | 3/8" diameter, 3-3/8" embedment |
| Pro-Proxy 300 | Unitex | Adhesive/Epoxy | 1/2" diameter, 4.5" embedment |
| Pro-Proxy 300 Fast | Unitex | Adhesive/Epoxy | 1/2" diameter, 4.5" embedment |
| Thunderbolts | Universal Fastenings | Mechanical Anchor | 1/2" diameter, 4" embedment |
| HS-200 | Adhesives Technology Corp. | Adhesive/Epoxy | 3/8" diameter, 3-1/2" embedment. Use when temperature is below 60 F and allow 48 hours before loads. |
| REZI-WELD Gel Paste | W.R. Meadows, Inc. | Adhesive/Epoxy | 3/4" diameter, 7-1/2" embedment |
| PE 1000+ | Powers Fasteners Inc. | Adhesive/Epoxy | 1/2" diameter, 4-1/2" embedment |
| Powers-STUD+SD1 | Powers Fasteners Inc. | Mechanical Anchor | 1/2" diameter, 3-1/2" embedment |
| UltraBond 365 | Adhesives Technology | Adhesive/Acrylic | 1/2" diameter, 4-1/2" embedment | UltraBond 4CC | Adhesives Technology | Adhesive/Epoxy | 3/8" diameter, 3-3/8" embedment |
Resources
Contact
Ron Mulvaney
Office of Materials and Road Research
651-366-5575